m.cnreagent.com
电池充电器自动测试系统，最多可同时间测试4个被测物(双组输出)，左右自动切换测试，多国语言选择，测试程序、报告编辑功能。
产品特点
- 最多可同时间测试4个被测物(双组输出)
- 左右自动切换测试
- 多国语言选择
- 量测速度快、准确度高
- 模块化设计、扩充性强、维修容易
- 测试程序编辑功能
- 测试报告编辑功能
- 易操作的人机界面
- 具强大统计分析能力
- 测试结果可转成Excel格式
- 使用者权限设定
技术参数
Signal Processor (EXTECH 9811) | |||
Power Input/Output Channels | Input 3CH with independent AC/DC Power measurement / Output 6CH with independent DC measurement | ||
Signal Output Relay Contact | PASS, FAIL, TESTING:250V,2A maximum | ||
Remote Control | Independent Left and Right with 4 Bit TTL Input and 3 Relay Contact( 250V,2A maximum) | ||
Input /Output Terminal | Input: Three Port Selection 250VAC 15A maximum, Output: 40A maximum | ||
Input Measurement Board | |||
| Range | Resolution | Accuracy |
AC Voltage, V | 00.00– 30.00 | 0.01V | ± (1% of reading + 1 count) |
0.0 – 300.0 | 0.1V | ± (1% of reading + 1 count) | |
AC Current, A(RMS) | 0.0000 – 0.3500 | 0.0001A | ± (1% of reading + 5 counts) |
0.000 – 3.500 | 0.001A | ± (1% of reading + 5 counts) | |
0.00 – 15.00 | 0.01A | ± (1% of reading + 2 counts) | |
AC Current, A(Peak) | 0.00– 200.00 | 0.1A | ± (2% of reading + 4 counts) |
AC Power, W | 00.00 – 35.00 | 0.01W | ± (1% of reading + 5 counts) |
0.0– 350.0 | 0.1W | ± (1% of reading + 1 count) | |
0– 4000 | 1W | ± (1% of reading + 1 count) | |
Output Measurement Board | |||
RIPPLE & NOISE Bandwidth | 35~20MHZ | ||
Input Impedance | AC coupled 50W | ||
Range 1, mVp-p (100 ~ 1M Hz ) | 0.0– 300.0mV | 0.1mV | ±(2% of Reading + 2% of F.S.) |
Range 2, mVp-p (100 ~ 1M Hz ) | 0 – 3000mV | 1mV | ±(2% of Reading + 2% of F.S.) |
Range 1, mVp-p (<100HZ/ >1MHZ ) | 0.0– 300.0mV | 0.1mV | -3dB - ( 2% of Reading + 2% of F.S.) ~ |
Range 2, mVp-p (<100HZ/ >1MHZ ) | 0 – 3000mV | 1mV | -3dB - ( 2% of Reading + 2.5% of F.S.) ~ ( 2% of Reading + 2.5% of F.S.) |
Overshoot | |||
Range 1, V | 0.00 – 35.00 | 0.01V | ± (1% of reading + 0.2% of F.S) |
Range 2, V | 30.0 – 200.0 | 0.1V | ± (1% of reading + 0.2% of F.S) |
DC Current Measurement | |||
Range 1 ,mA | 0.000 –3.000 | 0.001mA | ±(0.3% of reading + 0.2% of F.S) |
Range 2 ,mA | 0.00 –30.00 | 0.01mA | ±(0.3% of reading + 0.2% of F.S) |
Range 3 ,A *1 | 0.00– 30.00 | 0.01A | ± (0.5% of reading + 0.2% of F.S) |
Programmable Output Voltage | |||
DC Voltage , V(Max. 10mA) | 0.000-8.000 | 0.002V | ±(0.3% of reading + 2 counts) |
External DC Voltage Measurement | |||
DC Voltage , V | 0.000-8.000 | 0.002V | ±(0.3% of reading + 2 counts) |
Short Current Measurement | |||
DC Current ,A | 0.0– 200.0 | 0.1A | ± (2% of reading + 4 counts) |
Timing Analyzer (EXTECH 9820) | |||
Input port | 300Vp-p Signal Differential Input | ||
Number of channels | 12 Channel (Include PG *1 , Sync *1) Isolated DC 500V | ||
Trigger level, two Range | RN1 ± 0-20V , RN2 ±0-200V | ||
Trigger level, two Accuracy | ±1.0% + 2 counts | ||
Measurement Timer, mS | Range | Resolution | Accuracy |
| 0.0~9999.9 | 100μs | ±(0.2% + 2 counts) |
Programmable AC Power Source (EXTECH 6130) | |||
MODEL 6130 | 3KVA/0-300V/Max. 25.2A | ||
Power Rating | 3000VA | ||
Output Voltage,AC | 0-300V AutoRange | ||
Max AC output Current(RMS) | 12.6AHighVoltageRange / 25.2ALowVoltageRange | ||
Output Frequency | Range: 45-500HZ, Resolution: 0.1HZ, Accuracy: ±0.01% of setting | ||
Harmonic Distortion | THD<0.5% at 45-500Hz (Resistive Load) | ||
Load Regulation | ± (0.5% of output +0.5V) at Resistive Load | ||
Turn On Phase Angle | 0-360° Resolution: 1°, Accuracy: ±1°(45-65HZ) | ||
Electronic Load (3310A ×2) | |||
MODEL 3310A | 60V/60A/150W | ||
| Range | Resolution | Accuracy |
CC MODE | 0-3A/0-30A | 0.75mA/7.5mA | ±(0.2% of Setting + range) |
CR MODE | 2-8KΩ/0.1-2Ω | 0.5mS/0.25mΩ | ±(0.2% of Setting + range) |
CV MODE | 0-60V | 0.015V | ±(0.1% of Setting + range) |
DYNAMIC MODE | THigh/TLow 50μSec TO 9.999Sec | ||
OPERATION | Slew Rate 0.5-125mA/μSec, 5mA-1.25A/μSec. | ||
LoadONVoltage | 0-3V ,Adjustments are made through the Load module VR1 resistance , Output voltage default is 1V. | ||
Protection | OCP, OPP, OVP, OTP | ||
Programmable DC Power Supply(PPS-2017) OVP | |||
MODEL 2017 | 60V/3A/180W | ||
| Range | Resolution | Accuracy |
Output Voltage,DC | 0-60V | 20mV | 0.05% ± 2 LSB |
Current,DC | 0-3.0A | 1mA | 0.15% ± 5 LSB |
Programmable DC Power Supply(PPS-2016) | |||
MODEL 2016 | 20V/10A/200W | ||
| Range | Resolution | Accuracy |
Output Voltage,DC | 0-20V | 5mV | 0.05% ± 2 LSB |
Current,DC | 0-10A | 3mA | 0.15% ± 5 LSB |
System Controller | |||
Controller | IPC P4 -2.4GHZ with DDR 256MB,CD-ROM 52 SPEED, FDD 1.44MB,HDD 40GB | ||
Operational Environment | Windows XP with Excel XP | ||
Display monitor | 15" TFT LCD Display | ||
Interational Board | NI GPIB Card (PCI) | ||
System General Specifications | |||
Dimension and Weight | 35U Equipment Rack, 180Kg | ||
Electrical | 230 VAC±10% , 50/60Hz 15A Single Phase | ||
Environment | 40℃,RH 20~80% | ||
Option maximum Input 4CH/Output 8CH. Product specifications are subject to change without notice. | |||
*1 Sofware measurement are not available. | |||