[登录] [免费注册]
试剂仪器网
发布求购
位置：首页 > 资料中心 > 化工字典 > 63148-52-7
关键词:       仅模糊查询
CAS: 63148-52-7
分子式: [Si(CH3)2O]x[Si(CH3)(C6H5)O]y
分子量: 408.67
沸点: 205℃
中文名称: 
甲基苯基二甲基(硅氧烷、硅酮)
英文名称: 
Siloxanes and Silicones,di-Me,Me Ph
Siloxanes and Silicones, di-Me, Me Ph
dimethyl(88-92%)-phenylmethyl(8-12%)siloxane copolymer
poly(dimethylsiloxane-co-methylphenylsiloxane)
推荐供应商
货号品牌产品名称规格包装、参考价格
C767958MACKLIN聚(二甲基硅氧烷-co-甲基苯基硅氧烷)粘度: 500 cSt372元/10ml;   咨询
储存：室温, 密封, 干燥
C767959MACKLIN聚(二甲基硅氧烷-co-甲基苯基硅氧烷)粘度: 50 cSt399元/10ml;   咨询
储存：室温, 密封, 干燥
A768742MACKLIN硅油AP150viscosity ~150 mPa.s, neat(25 °C)298元/100g;   1029元/500g;   咨询
储存：室温, 密封, 干燥
P833867MACKLIN苯基甲基-二甲基硅氧烷共聚物125 cst308元/5g;   762元/25g;   1524元/100g;   5435元/500g;   咨询
储存：2~8℃,Seal
状态：粘稠液体
50384Sigma-AldrichSilicone oil AP 150 Wackerviscosity ~150 mPa.s,   neat(25 掳C)731.47元/250 ML;   2644.77元/1 L;   咨询

产品说明

一般描述

硅油 AP 150 Wacker 是一种传统电流变液。在硬质铁电陶瓷的极化过程中用作绝缘介质。硅油是由疏水性聚合物和单体化合物组成的混合物，含有硅氧键。其理化特性已有报道。 已经研究了硅油作为玻璃体替代物的用途。

应用

AP 150 Wacker硅油被用于防止在基于藻酸钙水凝胶和两种右旋糖酐甲基丙烯酸酯衍生物的可注射多糖体系流变学表征过程中出现水分蒸发。可通过硅油过滤离心技术测定叶绿体的体积。

包装

250 mL in poly bottle
1 L in poly bottle

基本信息

MDL编号MFCD05865496
NACRESNA.22

产品性质

质量水平100
折射率n20/D 1.51
粘度~150 mPa.s, neat(25 ℃)

安全信息

储存分类代码10 - Combustible liquids
WGKWGK 3
闪点(F)437.0 °F - closed cup
闪点(C)225.00 ℃ - closed cup
个人防护装备Eyeshields, Gloves
175633Sigma-AldrichSilicone oilhigh temperature1680.77元/100 G;   3421.26元/500 G;   4944.42元/1 KG;   11016.3元/2.5 KG;   咨询

产品说明

一般描述

硅油是一种由聚(二甲基硅氧烷-co-甲基苯基硅氧烷)链组成的高粘油。

应用

硅油已被用作无容器蛋白质结晶技术中的中等组分，其不需要与固体表面接触。在合成2-甲基氮杂环庚烷-1-羧酸甲酯期间，它被用作油浴。

包装

1, 2.5 kg in poly bottle
100, 500 g in poly bottle

基本信息

线性分子式[Si(CH3)2O]x[Si(CH3)(C6H5)O]y
MDL编号MFCD00133270
PubChem化学物质编号24850517
NACRESNA.21

产品性质

蒸汽压<5 mmHg ( 25 ℃)
质量水平200
参数−40-450 °F temp. range (−40-230 ℃)
折射率n20/D 1.495
密度1.05 g/mL at 25 ℃
SMILES stringC[Si](C)=O.C[Si](=O)c1ccccc1

安全信息

储存分类代码10 - Combustible liquids
WGKWGK 3
闪点(F)437.0 °F - closed cup
闪点(C)225.00 ℃ - closed cup
个人防护装备Eyeshields, Gloves
378488Sigma-AldrichPoly(dimethylsiloxane-co-methylphenylsiloxane)viscosity 125 cSt 1165.7元/50 ML;   咨询

基本信息

线性分子式[Si(CH3)2O]x[Si(CH3)(C6H5)O]y
MDL编号MFCD00133270
PubChem化学物质编号24863559
NACRESNA.23

产品性质

质量水平100
折射率n20/D 1.497
粘度125 cSt
密度1.066 g/mL at 25 ℃
SMILES stringC[Si](C)=O.C[Si](=O)c1ccccc1

安全信息

储存分类代码10 - Combustible liquids
WGKWGK 3
闪点(F)437.0 °F - closed cup
闪点(C)225.00 ℃ - closed cup
378445Sigma-AldrichPoly(dimethylsiloxane-co-methylphenylsiloxane)viscosity 50 cSt 1159.67元/50 ML;   咨询

基本信息

线性分子式[Si(CH3)2O]x[Si(CH3)(C6H5)O]y
MDL编号MFCD00133270
PubChem化学物质编号24863556
NACRESNA.23

产品性质

质量水平100
折射率n20/D 1.423
粘度50 cSt
密度0.982 g/mL at 25 ℃
SMILES stringC[Si](C)=O.C[Si](=O)c1ccccc1

安全信息

储存分类代码10 - Combustible liquids
WGKWGK 3
闪点(F)214.0 °F - closed cup
闪点(C)> 101.1 ℃ - closed cup
个人防护装备Eyeshields, Gloves, multi-purpose combination respirator cartridge (US)
378461Sigma-AldrichPoly(dimethylsiloxane-co-methylphenylsiloxane)viscosity 500 cSt 1213.82元/50 ML;   咨询

基本信息

线性分子式[Si(CH3)2O]x[Si(CH3)(C6H5)O]y
MDL编号MFCD00133270
PubChem化学物质编号24863558
NACRESNA.23

产品性质

折射率n20/D 1.4291
粘度500 cSt
密度0.995 g/mL at 25 ℃
SMILES stringC[Si](C)=O.C[Si](=O)c1ccccc1

安全信息

储存分类代码12 - Non Combustible Liquids
WGKWGK 3
闪点(F)Not applicable
闪点(C)Not applicable
PMM-1025FluorochemPHENYLMETHYLSILOXANE-DIMETHYLSILOXANE COPOLYMER, 500 cSt858元/100g;   6160元/1kg;   咨询

基本信息

CAS Number63148-52-7
Boiling Point>205℃
Melting Point<0℃
Density1

安全信息

图形或危害标志
危险性说明 H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
防范说明 P233: Keep container tightly closed.
P260: Do not breathe .
P261: Avoid breathing .
P264: Wash hands thoroughly after handling.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear .
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P304: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing..
P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P321: Specific treatment (see relevant procedures. on this label).
P332 + P313: If skin irritation occurs: Get medical advice/ attention.
P337 + P313: If eye irritation persists: Get medical advice/attention.
P340: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P362: Take off contaminated clothing and wash before reuse.
P403: Store in a well-ventilated place.
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
P405: Store locked up.
P501: Dispose of contents/container to in accordance with local regulation .
PMM-1015FluorochemPhenylmethylsiloxane-Dimethylsiloxane Copolymers cSt 50968元/100g;   6358元/1kg;   咨询

基本信息

CAS Number63148-52-7
MDL NumberMFCD00133270

安全信息

图形或危害标志
危险性说明 H315: Causes skin irritation.
H319: Causes serious eye irritation.
H335: May cause respiratory irritation.
防范说明 P233: Keep container tightly closed.
P260: Do not breathe .
P261: Avoid breathing .
P264: Wash hands thoroughly after handling.
P271: Use only outdoors or in a well-ventilated area.
P280: Wear .
P302 + P352: IF ON SKIN: Wash with plenty of soap and water.
P304: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing..
P304 + P340: IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P305 + P351 + P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P312: Call a POISON CENTER or doctor/physician if you feel unwell.
P321: Specific treatment (see relevant procedures. on this label).
P332 + P313: If skin irritation occurs: Get medical advice/ attention.
P337 + P313: If eye irritation persists: Get medical advice/attention.
P340: Remove victim to fresh air and keep at rest in a position comfortable for breathing.
P362: Take off contaminated clothing and wash before reuse.
P403: Store in a well-ventilated place.
P403 + P233: Store in a well-ventilated place. Keep container tightly closed.
P405: Store locked up.
P501: Dispose of contents/container to in accordance with local regulation .
CAS号首数字顺序排列： 1 2 3 4 5 6 7 8 9